Thingiverse
Corne case and tenting ramp
par hueyhy
25
Téléchargements
18
Likes
0
Makes
For crkbd (Corne) keyboard. I'm using crkbd cherry v2.1 PCB.
The ramp tenting mechanism is inspired by https://www.thingiverse.com/thing:3473796
Warning: the ramp makes a hollow sounds which you might not like. I'm planning to try a solid ramp version, although it may take longer to print. If you care about the sound, don't use the ramp version. You can modify it to be a solid one.
M2 screws are used for assembly. The ramp and case can be glued together.
The wrist rest is used together with Grifiti wrist pads. Those are too big so I cut one side in two halves as shown in the second picture.
Mirror the parts in your slicer to print the right half.
The ramp tenting mechanism is inspired by https://www.thingiverse.com/thing:3473796
Warning: the ramp makes a hollow sounds which you might not like. I'm planning to try a solid ramp version, although it may take longer to print. If you care about the sound, don't use the ramp version. You can modify it to be a solid one.
M2 screws are used for assembly. The ramp and case can be glued together.
The wrist rest is used together with Grifiti wrist pads. Those are too big so I cut one side in two halves as shown in the second picture.
Mirror the parts in your slicer to print the right half.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
