Thingiverse
Corner Bracket Cover
von da_syggy
7
Downloads
10
Likes
0
Makes
Corner bracket cover for 25mm x 50mm corner brackets.
The wall bars we mounted for our kids came without covers for the wall mounting brackets.
Fortunately the screws were centered and not offset, so I used slightly larger screws with a 10mm head that stick out a bit and designed a bracket that slides over the screwheads.
I recommend using strong materials like petg. The wood PLA I used is quite brittle and breaks easily.
The wall bars we mounted for our kids came without covers for the wall mounting brackets.
Fortunately the screws were centered and not offset, so I used slightly larger screws with a 10mm head that stick out a bit and designed a bracket that slides over the screwheads.
I recommend using strong materials like petg. The wood PLA I used is quite brittle and breaks easily.
da_syggy veröffentlicht auch auf
3 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
