Corner rail holder

I needed a method of mounting a dowel to the corner of my office but all the mounts I could find assumed a straight angle from wall to wall rather than 45˚.

My dowel had a diameter of 28mm and I used a 5mm screw with a 10mm head and a countersink of about 5mm so that is what the STL and the default settings in the SCAD file are for.

But I've commented all the parameters so it should be simple enough to customise :)

Print with the end that touches the wall touching the buildplate and no supports will be needed.

Remember to mirror image appropriately for the other end!