Corona Extra Hueforge

Corona Extra Hueforge Boost MeThanks for your support ;) Project: CoronaExtra.png Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 133.99x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.5mm and the Actual Depth is 2.3mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA R3D Red Transmission Distance: 3.8 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5 This print uses 5 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Dark Blue At layer #15 (1.28mm) swap to Red At layer #16 (1.36mm) swap to Yellow At layer #21 (1.76mm) swap to Jade White for the rest. Please leave a comment and like if you like my Hueforge. Thank you very much.