Correcaminos Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150.06x106.29mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2mm and the Actual Depth is 2mm Filaments Used:PLA Generic Recicled Black Transmission Distance: 0.6PLA Generic Recicled Grey Dark Transmission Distance: 2PLA Generic Recicled Orange Transmission Distance: 5PLA Generic Recicled Yellow Transmission Distance: 6This print uses 4 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Grey DarkAt layer #12 (1.04mm) swap to BlackAt layer #13 (1.12mm) swap to OrangeAt layer #17 (1.44mm) swap to Yellow for the rest.