Thingiverse

Cotton Bud Container

by Volkamaus

0 Downloads

0 Likes

0 Makes

A simple canister I put together to hold cotton buds (Q-tips) on my painting desk. Printed as is, it is roughly the size of a standard soda can. Scalable to whatever size needed in your slicer of choice. Will need supports under the lid to ensure a nice clean print. Handle requires no supports. Prints in about 3 hours on an Anycubic Kobra Neo. YMMV. Project 1/12.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

3 h

Post-processing

Painting

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Cotton Bud Container need supports when printing?

No supports needed for Cotton Bud Container — it's designed to print clean off the bed.

How long does it take to print Cotton Bud Container?

According to the design notes, Cotton Bud Container takes approximately 3 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Cotton Bud Container available in?

Cotton Bud Container is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Cotton Bud Container free to download?

Yes, Cotton Bud Container is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Cotton Bud Container

Similar Models

Add to Collection