Cowboy Riding into Sunset

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm (using HRM with first 4 layers at .16)The Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 3mm and the Actual Depth is 3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Lava Red Transmission Distance: 1 PLA PolyTerra Sunrise Orange Transmission Distance: 2 PLA PolyLite Pro Cold White Transmission Distance: 0.5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Lava Red At layer #20 (1.68mm) swap to Sunrise Orange At layer #26 (2.16mm) swap to Cold White for the rest. Boost MeBoost if you like!!