Slicer Discord
3DSEARCH / Electronics / CP2112 shield case
CP2112 shield case – 3D printable model from MakerWorld MakerWorld
Electronics

CP2112 shield case

by bob_does_not_exist · Electronics
24 Downloads
5 Likes
13 Makes
Go to Model
Simple two part case for CP2112 USB-C module.Material: PLANozzle: 0.4mmThe top cover is connected with a snap-fit latch. The PCB can be fixed to the enclosure using two 2 mm heat-set threaded inserts or a screw. I printed it at a 0.08 mm layer height and the result was good.
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Advanced Low confidence
Why?
0.08mm layers · significant post-processing
Hardware needed
Supports 1/3
Assembly 2/3
Settings 2/3
Bed size 0/3
Post-process 2/3
Printer
FDM / FFF
File format
STL
Material
PLA, Polycarbonate
Layer height
0.08 mm
Post-processing
Gluing, Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
CP2112 USB C Case
CP2112 USB C Case
by Gabriel
↓ 66 ♥ 1
CP2112 USB C Case
CP2112 USB C Case
by Gabriel
↓ 31 ♥ 5
Box for CP2112 board
Box for CP2112 board
by alex19851111
↓ 4 ♥ 7
Shell Case for OLED screen 0.91 inches
Shell Case for OLED screen 0.91 inches
by tommy
↓ 160 ♥ 32
Case Shell for DT-Series Beyerdynamic Headphones
Case Shell for DT-Series Beyerdynamic Headphones
by Whispertron
↓ 4 ♥ 1
Shell Case for Kindle Paperwhite 10th Gen (2018 onwards)
Shell Case for Kindle Paperwhite 10th Gen (2018 onwards)
by olivvybee
↓ 200 ♥ 19
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection