CR-30 Mutant Mount

This is my mount for the Wham Bam Mutant on the CR-30. This kit is designed to work with printers that have already been upgraded to an X-axis linear rail. I've included the STEP file and all DXF files to have the parts lasewr cut from aluminum.. All Parts can be cut from 3.2mm (what SendCutSend stocks) and will work fine or if you can find a source they were designed to be made from 4mm.

All Holes that are 2.5mm diameter will need to be tapped to M3
Only part that needs to be printed is the Endstop Bracket.stl.

As SendCut Send does not offer Countersinking on such small parts you will need the following counter sink bit

McMaster Carr - #28145A71

If you would like to key the cost of Tapping the parts down you can do that yourself with the following bit.

McMaster Carr - #2605A21

The two small holes on the Endstop Bracket will need to be tapped to M2 with the following tap.

McMaster Carr #2605A12

Hardware required.

Qty4 - M3X6mm Hex Flat head - McMaster Carr