CR10 control box wall mount

This is a simple gusseted wall mount for the control box that comes with most Creality printers. It is sized to fit the box somewhat snugly, although I used double sided tape to hold the box in place.

You will need 2 of these, mounted at whatever distance apart you feel appropriate. The box is fairly light, so these should be more than robust enough. I can always modify the file and re-upload if anyone wants thicker gussets. They're currently .25" x .25" or 6.35x6.35mm. If the holes are drilled out to .1875" or 3/16" they will take a #8 flathead screw perfectly.

Attached is a picture of my setup to show the context of why I made this Thing.