CR10s-PRO Direct Drive Bracket Mod

This is a really simple bracket that is easy to install, and use, without changing any of the printing dimensions and effectively shortening the length of the Bowden needed from the drive to the extruder. This is possible to assemble with the stock screws but I recommend buying a cheap set of m3 screws with varying lengths (if you don't already have one( to accompany this print. I highly recommend this be printed as strongly as possible, to reduce flex, with your stiffest filament, and at least six-layer lines. Otherwise, this is a good bracket to make your cr-10 a nice printer.

other notes:
- This is not a design to increase printing speed, but quality and support materials. Change your slicer settings accordingly to account for less retraction at a slower speed and reduce your XY speed a bit too. Patience is key with this design