CR10s Pro Linear Rail Mod

Easy upgrade for the CR10s Pro to MGN12 Linear rails. You can use the original Extruder Plate fom the CR10s Pro. The lower wheel can stay in place as a additional guide. The extruder plate not change the position in X-direction
The only hardware modification are 4 3.2mm holes in the mounting plate for the heating bed.

What you need:
3 MGN12 400mm Rails
Profile 20x20x50 min 3pce
M3 T-Nuts
M3x8 Hex screws
M5 Hex screws to attache the 20x20 profiles on the X-gantry
M5 T-Nuts