CR10s X-axis hinge mount

Simple adaptation of the base from 'C270 camera mount' so that the arm parts from 'PS3 camera mount' can attach to it for easy camera attachment/positioning.

Each joint requires a m3x14 nut/bolt pair and the hinge adaptor requires a m3x8 nut/bolt.

There are two versions included, one which has the joint perpendicular to the axis and the other which is flush with the mount.



If you plan on using this for the original PS3 camera mount, you need a right angle somewhere in the arm chain in order to orient the camera upright. Print two of the CRT10s_hinge_angle pieces and screw them together with to create an adapter that will allow you to twist the arm chain to whatever orientation you need. If it initially seems like the nut won't fit into the hole, just screw the bolt into it and the screw action will pull it in.

I suggest printing the pieces at a high infill with a brittle filament (especially the base, which should be 100%) especially if you plan on putting more than two