Thingiverse
CR2032 coin cell holder
par peter120
19
Téléchargements
3
Likes
0
Makes
Simple screw closed coin cell battery holder design.
I needed a quick power source for a low power instrumentation amplifier.
Run the wire in and out the holes. The top and bottom surfaces deform which keeps pressure on the wire to battery contacts. Works fine. I put some tape over the plus and minus wires before I stuffed several parts into a small metal box. The threads are 0.75mm and they printed fine with a 0.1mm layer height. Flip over the top part before slicing and printing.
Designed in Fusion 360
I needed a quick power source for a low power instrumentation amplifier.
Run the wire in and out the holes. The top and bottom surfaces deform which keeps pressure on the wire to battery contacts. Works fine. I put some tape over the plus and minus wires before I stuffed several parts into a small metal box. The threads are 0.75mm and they printed fine with a 0.1mm layer height. Flip over the top part before slicing and printing.
Designed in Fusion 360
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
