CR2032 Led Light Base

I needed a simple and small LED light base for the small prints and models I have.The easiest way for me was to modify a cheap CR2032 coin cell battery-operated tealight design. So I did it..Some cables are soldered to the LED pins. Most of us here are makers, so it is not a big deal, I guess..My LED choice is:Diffused 5mm Slow Fade Flashing RGB LEDhttps://www.adafruit.com/product/679. You can find it cheaper on eBay or AliExpress. For the sake of your fingernails, please use a tool such as a screwdriver to open the lid, especially for the initial use! Some filaments are harder than rock, and they don't bend..Have fun!Notes:For "cr2032_LedBase Basic_Base.stl" use support with"Touching Buildplate" setting in Cura!