Crank for 5-Ways Roller Coaster

5-Ways Roller Coaster Manual Crank For all those who want to use a manual crank instead of a motor, I've added a crank construction as a separate add-on for the 5-Ways Roller Coaster model https://makerworld.com/de/models/594509 Installation is simple and requires no special explanation1. PRESS the crank base element onto the base plate (where the motor housing normally goes) so that it's perfectly fitting2. attach the larger axle mount at the front next to the gearbox3. insert the axle4. attach the smaller axle mount at the front next to the gearbox over the larger axle mount (from point 2) and screw it in place5. screw the curved crank and crank sleeve together - but do NOT tighten - with one BT2.5x6 Button Head Cap Self Tapping Screw from the BBL store or any other max. M3x6-10mm self-tapping screw6. plug the crank into the axle. The crank is available in two versions. “5-Ways Crank curved v2.stl” is practically impossible to remove once it has been plugged in. Notes:Filamen