Crash Test Model Rocket

This rocket is not for dummies!! No, wait, that's EXACTLY who it's for!

My "dummy" was a 4.5" posable figure from Hobby Lobby but your's can be any similar sized figure or doll. Doll?! It's an ACTION FIGURE!

The original concept occurred when my grandson said I should build a rocket to send a doll house doll up. But we didn't have one, so I bought the posable figure.

There are three nosecones you can use on this rocket. A regular old rocket nosecone. A "Simple Chair" nosecone, or the DX Deluxe chair with pop out landing legs!!

To build this rocket you will need the following:
* A BT-80 (66mm) body tube. I used 300mm of this.
* A BT-50 (24mm) body tube. I used about 100mm of this, enough for an Estes E motor and the engine block portion of the EngineBlock part. That goes inside the motor tube and when the glue dries, I cut the bottom of the motor tube flush to the bottom of an E-motor.
* Shock Cord, I used Kevlar line.
* An 18" Parachute for the main rocket.
*