Cratos Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.35x210.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 1.52mm Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200.35x210.5mm in sizeYou may print at higher layer heights below the Base Thickness of 0.72mmThe Max allowed Thickness is 2.48mm and the Actual Thickness is 1.52mm