Thingiverse
Creality BEST DIRECT DRIVE MOUNT
by ElderRacing
214
Downloads
148
Likes
1
Makes
Probably the best Directdrive setup for Creality printers. It has an absolutely compact design, perfect weight distribution and is very sturdy. 100% tested and working!
The special thing about the setup is, on the one hand, the high-quality components, which can easily be exchanged for others, and the modular expandability of the setup. The weight is distributed over two attachments: The extruder and stepper are held by the rear attachment, which is screwed onto the carrier plate from behind so that the weight of the stepper and the extruder is directly above the rail. The hotend and the remaining attachments are attached from the front using the Klemco mount. This ensures perfect weight distribution and no front-heavy setup.
The setup is designed for a BMG extruder and a Dragon hotend, but all other hotends can also be attached with a grove mount.
The setup is based on the modular, well thought out and innovative Klemco Mount.
https://www.klemco.net/e3d-compatible-multi-moun
The special thing about the setup is, on the one hand, the high-quality components, which can easily be exchanged for others, and the modular expandability of the setup. The weight is distributed over two attachments: The extruder and stepper are held by the rear attachment, which is screwed onto the carrier plate from behind so that the weight of the stepper and the extruder is directly above the rail. The hotend and the remaining attachments are attached from the front using the Klemco mount. This ensures perfect weight distribution and no front-heavy setup.
The setup is designed for a BMG extruder and a Dragon hotend, but all other hotends can also be attached with a grove mount.
The setup is based on the modular, well thought out and innovative Klemco Mount.
https://www.klemco.net/e3d-compatible-multi-moun
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
![[Update: 2022.10.31] Ender 6 BIQU H2 Mount / 4010 & 5015 Fan Duct / BLTouch & CR Touch / ADXL343 & ADXL345 / Filament Guide / Extruder Filler / Drag Chain Kit](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Fassets%2Fbe%2F91%2F2d%2Ffb%2Fe9%2Flarge_display_TinkerCAD_Text.jpg&w=400&h=300)
