Thingiverse
Creality filamentholder
door paultsigakis
55
Downloads
19
Likes
0
Makes
Made this printable bolt for replacing the original creality spoolholder, this part is to replace the plastic part of the holder.
Also made a bearing shell/cup for a 20x42x12 bearing, so that i can use it on the filament-holder, ensuring a smooth rollout of the industrial size core size on Form Futura 1kg. filaments
I made a new nut, making the little shim on the picture obsolete.
Print the bolt with support.
20x42x12 is a cheap bearing i had easy access to, and also alot of hardware stores stock this bearing, that is why i chose that overkill dimension :-)
You will need two ball-bearings, one for each side.
Also made a adapter with no bearing option, but i strongly recommend using bearings.
I recommend printing the bolt with 5 outer walls, and fill at 100%, this bolt need to be strong.
There is also a extra long bolt here for 3Kg. rolls.
Feel free to comment, and give suggestions for improvements.
Also made a bearing shell/cup for a 20x42x12 bearing, so that i can use it on the filament-holder, ensuring a smooth rollout of the industrial size core size on Form Futura 1kg. filaments
I made a new nut, making the little shim on the picture obsolete.
Print the bolt with support.
20x42x12 is a cheap bearing i had easy access to, and also alot of hardware stores stock this bearing, that is why i chose that overkill dimension :-)
You will need two ball-bearings, one for each side.
Also made a adapter with no bearing option, but i strongly recommend using bearings.
I recommend printing the bolt with 5 outer walls, and fill at 100%, this bolt need to be strong.
There is also a extra long bolt here for 3Kg. rolls.
Feel free to comment, and give suggestions for improvements.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
