Creality Gantry (Ender 5) Wire guide

This is a little wire guide that fits snugly over the Creality stock tensioner. While I made this for an Ender 5 gantry, this would probably work with other Creality printers. It holds the wires with the gantry axis while the carriage moves back and forth.

Be aware that the stock wiring on at least my Ender 5 plus may not reach all points on the print bed if it is in this wire guide. I did this because I switched to a direct drive extruder, so the existing wiring setup wasn't working well, and I had to move my main board out of the original mainboard housing.