Creality K1 Speedy Lid Riser multi sectional

TLDR; you'll need;

48 @ M3x4mm screws (button head allen)
4 @ M3x10mm screws (button head allen)
4 @ 6mmx4mm disc magnets
A fair amount of filament...

Print;

4 x PANEL A.stl
3 x PANEL B.stl
1 x REAR CUT OUT.stl
4 x CORNERS.stl
8 x MID CONNECT.stl
16 x CORNER CONNECT.stl

Additionally you might want to print out 4 x SINGLE RISE.stl, which are basically a bigger version of the corner parts, if you want to leave it vented for printing PLA but covered with the lid to prevent dust and foriegn objects from falling in.

The longer read is;

Here is a sectional riser to stop the reverse bowden from rubbing on the lid once you free it from the cable chain, becuase its constraint within the cable chain is detrimental to the otherwise seemingly great printer design and probably why you're looking for this in the first place :)

I designed it to be printed flat on the build plate for best aesthetics, and easiest printing. The corner parts "stand up sideways" on their 45 d