Creality K2 Plus - CFS Flipper

This is inspired by the AMS2 Flipper created for the Bambu Labs AMS2 system by Jakob_K_Design. Original design here: https://makerworld.com/en/models/1363398-ams-flipper-better-access-to-your-p1s-x1c#profileId-1408595

I modified their design so it would fit the creality CFS and bolt to our K2 Plus printers using four of the rear panel threaded holes and an alignment peg. This has gone through several iterations, but in its current form both versions can be printed in PETG and be plenty stiff. The taller version that accommodates a 56mm riser has more flex in PETG, so I ended up using PPA-CF, but unless you are operating your printer in a windy area, the PETG is likely fine.

My main reason for wanting to be able to tilt the CFS up and out of the way was so that I could print TPU from a top mounted spool without having issues (or atleast, having less issues). Its also really nice to be able to tilt up the CFS when changing nozzles or making other adjustments or repairs to the print