Thingiverse
Creator Pro Storage Tray
5
Downloads
3
Likes
0
Makes
I dont use the spool holders that came with the printer, as such, I have two perfectly good slots in the back wall of the printer that I decided to put to work. I copied the dimensions from the spool holders that came with the printer in order to make a tray for tools and other misc items.
I would've like to make this a support free design, but having the "hook" down low put to much force on that section and would've caused more plastic to beef up the tray than it is to print with support. As is, some additional material was needed in that area to keep it strong enough.
If you limited on space or simply want them to be horizontal I included models for those also. Please note, I have not printed and tested these, however I simply moved the hook and "doubler plate" so I dont see any reason why they wont work. Only issue is they might see to much force at the hook/tray intersection. If anyone prints and has trouble, let me know and I can try to beef up the over stressed areas.
F
I would've like to make this a support free design, but having the "hook" down low put to much force on that section and would've caused more plastic to beef up the tray than it is to print with support. As is, some additional material was needed in that area to keep it strong enough.
If you limited on space or simply want them to be horizontal I included models for those also. Please note, I have not printed and tested these, however I simply moved the hook and "doubler plate" so I dont see any reason why they wont work. Only issue is they might see to much force at the hook/tray intersection. If anyone prints and has trouble, let me know and I can try to beef up the over stressed areas.
F
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
