Crimson Kraken

DO NOT DOWN SCALE if you’re using a .4 nozzle. If you do, do so at your own risk. You can upsize as much as your heart desires, but going any smaller than 130 mm is going to cause issues on the first layer, messing up the entire print. If you're using a .2 nozzle, theoretically you can downsize 50% and it should still work, but I haven’t tested with a .2 nozzle. It is also extremely important that you only print on a textured plate that has been freshly washed with a high-grade dish detergent. Do not print onto a dirty plate, and do not increase the speed of the first layer in the profile. This is a four color design, so you will need an AMS. When selecting your filament, you will notice there are five different filament types. Make sure the first and second filament spots have matching colors as spot number one is the background, and spot number two is designed as part of the octopus but they need to match, and then fill in the remaining three spots with whatever colors you want.