Crocs Shoes - Fully 3d-printed

Fully 3d printed crocs shoes “CrocsL/R” and “Holder” printed with Overture TPU (390 g) for the shoes I used: 2 walls 15% infill (gyroid) for the holder 2 walls 5% infill (monotonic) “Mount1/2” printed with PLA or PETG (5g) 3 walls 20% infill (cubic) Important notes: It is for EU shoe size number 42, but you can scale every part (CrocsL1,CrocsR1,Holder,Mount1,Mount2) to your size (use uniform scaling) If the shoe is too big to fit to the printers height, use supports, rotate in Y-Axis (green) and use the cut tool in your slicer to create a new flat surface parallel to the print bed   There are two ways to print this: Use a textured PEI bed and print it standing up without support Or use another not so sticky bed and print it standing up with support   Have fun with it and leave a like or follow if you like it! If there are any suggestions for improvement, feel free to write a comment.