Thingiverse
CTC i3 BLTouch / 3D Touch Mount
por madmachinations
13
Descargas
8
Likes
0
Makes
Here is a simple mount for the BLTouch or 3D touch for the CTC i3 Prusa clone.
It fits over the small plastic spacers that normally sit between the heatsink and the fan on the stock extruder.
As well as the mount itself, you will also want to print out a couple of the shims.
I'd recommend using your slicer to expand a shims height to 4mm, and print out two other shims that are the standard 1mm height. Or I guess you could print out 5-6 of the shims all 1mm tall.
I couldn't be bothered making anything with adjustment screws as I'm likely replacing my entire hot end, extruder and x-carriage soon.
But I have included the FreeCAD files in case you want to modify the mount.
It fits over the small plastic spacers that normally sit between the heatsink and the fan on the stock extruder.
As well as the mount itself, you will also want to print out a couple of the shims.
I'd recommend using your slicer to expand a shims height to 4mm, and print out two other shims that are the standard 1mm height. Or I guess you could print out 5-6 of the shims all 1mm tall.
I couldn't be bothered making anything with adjustment screws as I'm likely replacing my entire hot end, extruder and x-carriage soon.
But I have included the FreeCAD files in case you want to modify the mount.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
