Cura Profile for FlashForge Creator Pro

I was able to get Cura versions 3.6, 4.2.1, 4.4.1, 4.8.0, 4.9.0, 4.10.0, 4.11.0, 4.12.0, and 4.12.1 working with my FlashForge Creator Pro 2016 for all single extruder prints. *I haven't tried any other versions of Cura, but any versions between 3.6 and 4.12.1 will likely work as well, as should subsequent versions.* This thing contains a ZIP file which has all the configuration files necessary to get Cura working on your Creator Pro. There are two printer profiles: a left-extruder-only profile and right-extruder-only profile.

The Creator Pro printer profiles **work flawlessly with Cura 4.2.1 & subsequent versions**, but with Cura 3.6 after the nozzle is primed at the front left of the build plate (from the start G-gode), nothing is extruded at the start of the print. So **with Cura 3.6 I have to start every print with a 380 mm to 600 mm skirt**, depending on the layer height and width, before any plastic is actually extruded. Once it starts extruding a continuous line in the skirt