Thingiverse
Curtain Glide Ring
von Emh87
6
Downloads
5
Likes
0
Makes
Inner glide ring designed to snap inside the grommet interior to ensure a smooth, noiseless draw without scratching drapery pole.
This design was made for what appears to be the most common size curtain grommet on the market. You will probably have to make a couple test prints adjusting scale / settings as needed depending on how well your printer is calibrated.
It is recommended to print in nylon or PETG, with a brim (with a 0.16 mm to 0.2 mm brim distance if using Cura to help with removing the brim easily.), 0.2 mm layer height, and 0.44 mm line width.
This design was made for what appears to be the most common size curtain grommet on the market. You will probably have to make a couple test prints adjusting scale / settings as needed depending on how well your printer is calibrated.
It is recommended to print in nylon or PETG, with a brim (with a 0.16 mm to 0.2 mm brim distance if using Cura to help with removing the brim easily.), 0.2 mm layer height, and 0.44 mm line width.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
