Thingiverse
Curtain Rod Bracket
by ukasper
4
Downloads
5
Likes
0
Makes
This is a curtain rod bracket for rods with diameter up to 28 mm.
I created it in two parts to be able to hide the main screw.
The screw-hole for the mount to the wall is inside the holder. Just attach the wall-holder to the wall, put in the rod-holder, and fix it with a small screw in the appropriate hole.
With this little screw you are able to adjust the distance of the curtain from the wall.
The infill depends on the weight of your curtains. I decided to use 50% infill.
Update:
Sorry for the first Downloads. I forgot to shrink the bolt from the rod-holder a bit, to prevent not fitting into the wall-holder. Now it is about 0.5 mm shrinked. That should be enough space to be able to put the bolt into the wall-holder. Better tight fit than too much space.
You can grind down a bit from the bolt-surface, if it still is to tight.
I created it in two parts to be able to hide the main screw.
The screw-hole for the mount to the wall is inside the holder. Just attach the wall-holder to the wall, put in the rod-holder, and fix it with a small screw in the appropriate hole.
With this little screw you are able to adjust the distance of the curtain from the wall.
The infill depends on the weight of your curtains. I decided to use 50% infill.
Update:
Sorry for the first Downloads. I forgot to shrink the bolt from the rod-holder a bit, to prevent not fitting into the wall-holder. Now it is about 0.5 mm shrinked. That should be enough space to be able to put the bolt into the wall-holder. Better tight fit than too much space.
You can grind down a bit from the bolt-surface, if it still is to tight.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
