Thingiverse
Curved Spot Light Arm
von matthijsbos
10
Downloads
26
Likes
0
Makes
Curved spot light arm for mounting spot lights on top of a beam, cabinet, etc...
For spot fixtures with M10x1.0mm (fine) thread, commonly used in a lot of cheap spot lights.
In two variants with 120-degree or 180-degree curvature.
Has a feed-through for the power leads.
The 1.0mm pitch can be printed well on fine settings. Print with the threaded section on the bed, see PrusaSlicer screenshot. Wise to add a brim.
Onshape document: https://cad.onshape.com/documents/fdfe95b26f961b7c80e4c1e4/w/87a57acb36a3bb71e4f41e8f/e/3fee23bade4d95a97572667a?renderMode=0&uiState=65d65af6e1faf36fdd5a9785
For spot fixtures with M10x1.0mm (fine) thread, commonly used in a lot of cheap spot lights.
In two variants with 120-degree or 180-degree curvature.
Has a feed-through for the power leads.
The 1.0mm pitch can be printed well on fine settings. Print with the threaded section on the bed, see PrusaSlicer screenshot. Wise to add a brim.
Onshape document: https://cad.onshape.com/documents/fdfe95b26f961b7c80e4c1e4/w/87a57acb36a3bb71e4f41e8f/e/3fee23bade4d95a97572667a?renderMode=0&uiState=65d65af6e1faf36fdd5a9785
matthijsbos veröffentlicht auch auf
69 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
