Custom Fly Knife

This is a butterfly knife I made for fun. All the parts are printable and require no external parts or tools. Well, maybe a hammer.

To make this you will need to print:
-2 Axles
-1 Blade
-1 Handle (Blade)
-1 Handle (Blade) but mirrored in the slicer
-1 Handle (Safe)
-1 Handle (Safe) but mirrored in the slicer
-2 Pin F
-2 Pin M
-2 Pin Stop
-2 Spacer

Assembly:
1. Put the Pin Stops in the 2 holes on the blade farthest from each other.
2. With the blade extended, attach the 2 Handles (Safe) to the hole on the top/flat side with an Axle.
3. With the blade extended, attach the 2 Handles (Blade) to the hole on the bottom/sharp side with an Axle.
4. Hammer the Pin F and Pin M together through the holes at the bottom of the handle and use a Spacer to keep the handles properly spaced.
5. That should be it; learn some tricks!

(Sanding is highly encouraged for a better finish on the blade part. Best way is to print it blade side up and use supports on build plate only.)