Customizable Eggloft Egg Rocket Nose Cone

Fabricate "Side-A" and "Side-B". Also make the "Snap" piece which you can friction fit or glue into the slot on the Side-B shell. Adjust the depth of this piece so that when Side-A is mated to Side-B it is held snug.

Press fit and glue 4 small pins into the alignment holes on the Side-B shell. I used 4d finish nails cut down to size.

The included STL files here are for fitting into a BT-20 tube. After fitting, tape may be used to affix the casing by wrapping the shoulder and the tube. To use as a nosecone, the fitting tube should have a bulkhead and eyelet that's tied to the shock cord. Also additional centering rings on the tube will allow it to fit snugly into a larger rocket body. Alternatively, print the Customizable Rocket Nose Cone Coupler: http://www.thingiverse.com/thing:2302595 and screw in an eyelet.

If you want to use the Customizer to make a different size, these are some useful Estes rocket tube diameters (Ref: http://www.estesrockets.com/):

Inner diameters for