Customizable Enclosure / Housing OpenSCAD Library

# About

3D-FlexCase is a customizable OpenSCAD library for simple creation of electronic component housings / enclosures, such as your own PCBs, Arduino, Raspberry Pi, ESP6288, ESP32, etc.

The idea is to parameterize the basic housing and then add your specific extensions such as brackets, lead-throughs, etc.

# Requirements

### BOSL Library

This project uses the [BOSL library](https://github.com/revarbat/BOSL). Please install this as described [here](https://github.com/revarbat/BOSL#installation).

### Screws

Recommendation for screws to fix the cover on the tray:
* 4mm x 20mm flathead or
* 4mm x 25mm flathead

# Installation

1. Download the .zip from [github.com](https://github.com/whatis777/3d-flexcase) and extract
2. Rename directory `3d-flexcase-master` to `3d-flexcase`
3. Copy directory `3d-flexcase` to the [OpenSCAD library folder](https://en.wikibooks.org/wiki/OpenSCAD_User_Manual/Libraries) of your system
4. Restart OpenSCAD

# Usage

A simple