Customizable LEGO compatible Text Bricks

This is a customizer for creating LEGO® compatible rectangular bricks with text engraved on the sides (all 4 sides). You can of course also use it to create bricks without any text. It can create bricks as small as 1x1x1 (plate height) or as large as 48x48x18 (6 normal bricks high).

All dimensions are accurate, but it has a tolerance parameter so the dimensions can be tuned to your printer/filament so that they have a perfect fit with one another and with real LEGO® blocks. Real LEGO blocks have a horizontal play of 0.2 mm so that they can be connected to one another. So a 4x2 brick is 31.8x15.8 mm and a 6x2 brick is 47.8x15.8 mm, for example. The tolerance is in addition to the required 0.2 mm play and is subtracted from both sides of all walls so that the default tolerance of 0.05 would make the previously mentioned bricks 31.7x15.7 mm and 47.7x15.7 mm.

The customizer, by default, creates LEGO-sized bricks only. The large nameplate brick in the photos was scaled up in the slice