Thingiverse
Customizable Lithophane Stand with Backlight
by stylesuxx
299
Downloads
185
Likes
0
Makes
A lithophane stand for lithophanes generated by the [3DP.rocks lithophane generator](http://3dp.rocks/lithophane/). Use the outer curve template.
The customizer will generate three STL's one with the *bottom*, one with the *top* and one with *both* parts.
In the customizer you will need to adjust **s** and **h** according to your actual lithophane. Also you will need to adjust **bottom** and **top thickness**, this is the max thickness of your lithophane on the top and on the bottom.
I used a [12V white LED strip](https://goo.gl/129o2X) (2 segments of it) and a [12V, 2A power supply](https://goo.gl/1x3PJU). You should be able to use almost any kind of LED strip with any voltage you prefer. This just happend to be what I had lying around.
The customizer will generate three STL's one with the *bottom*, one with the *top* and one with *both* parts.
In the customizer you will need to adjust **s** and **h** according to your actual lithophane. Also you will need to adjust **bottom** and **top thickness**, this is the max thickness of your lithophane on the top and on the bottom.
I used a [12V white LED strip](https://goo.gl/129o2X) (2 segments of it) and a [12V, 2A power supply](https://goo.gl/1x3PJU). You should be able to use almost any kind of LED strip with any voltage you prefer. This just happend to be what I had lying around.
stylesuxx also publishes on
33 additional models across 2 more platforms
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
