Thingiverse
Customizable Minnowboard Max Turbot Case
par zogtrog
10
Téléchargements
5
Likes
0
Makes
UPDATED 15/2/1019 - now includes a side hole for side reset switch found on newer minnowboards
This is a case for the MinnowBoard Max Turbot computer board.
The case was designed using OpenScad.
Four M3 x 30 mm bolts need to joint base to the lid
Four short PC screws are needed to hold board in to the bottom tray.
Set variables to true / false within the SCAD script to remove / add case holes as needed.
Change the screw hole sizes to use different screws.
Increase tray depth to accomadate different lures.
This is a case for the MinnowBoard Max Turbot computer board.
The case was designed using OpenScad.
Four M3 x 30 mm bolts need to joint base to the lid
Four short PC screws are needed to hold board in to the bottom tray.
Set variables to true / false within the SCAD script to remove / add case holes as needed.
Change the screw hole sizes to use different screws.
Increase tray depth to accomadate different lures.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
