Thingiverse
Customizable Mould Maker
von RyanMellor
258
Downloads
186
Likes
0
Makes
How to use this mould making tool:
- Start with only the 'Axis' and 'Master' showing.
- Go to the 'Master' tab, use the tool at http://jsfiddle.net/Riham/yzvGD/embedded/result/ to convert your master STL in to two lists of 'points' and 'triangles' (AKA 'faces'), and paste these lists in to the relevant sections.
- Rotate the master to the desired orientation, and translate it to be approximately centred on the origin.
- Now show the 'Sprue' and 'Riser', and in the Sprue/Riser tab size/position them on the master.
- Now show the 'Mould Bottom' and 'Mould Top', and hide everything else.
- In the Mould tab resize the mould so that it surrounds the master
- Save the 'Mould Bottom' and 'Mould Top' separately and you're done!
- Start with only the 'Axis' and 'Master' showing.
- Go to the 'Master' tab, use the tool at http://jsfiddle.net/Riham/yzvGD/embedded/result/ to convert your master STL in to two lists of 'points' and 'triangles' (AKA 'faces'), and paste these lists in to the relevant sections.
- Rotate the master to the desired orientation, and translate it to be approximately centred on the origin.
- Now show the 'Sprue' and 'Riser', and in the Sprue/Riser tab size/position them on the master.
- Now show the 'Mould Bottom' and 'Mould Top', and hide everything else.
- In the Mould tab resize the mould so that it surrounds the master
- Save the 'Mould Bottom' and 'Mould Top' separately and you're done!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
