Customizable Pipe Connector Cube shape (fusion360)

This is the cube shaped connector for the round pipes.

There are two types, "2 direction type" and "3 direction type".　It can handle various pipe size. Customization is done by changing the parameters of fusion360 file (.f3d).
Try this connector once.

[Features]
-Customizable
-Fixed firmly
-Hard to break even if squeezed strongly with a wrench
-Easy to remove from the pipe

[Design point]
-Designed so that when the bolt is tightened, the bolt is parallel to the pipe. This enabled stable tightening.

[Bolt/Nut type to use]
type: Countersunk screw bolt and Nut M3 - M6 (If the screw heads do not hit each other, you can use screws of other shapes.)
bolt length: approximately equal to or longer than the pipe diameter.

[Customizable parameters]
-pipe inner diameter (min:8mm at M3)
-pipe outer diameter
-screw size (M3, M4 ,M5, M6)

Detailed screw dimensions are set automatically.
Screws larger than M6 are also possible by manually setting the screw related parameter