Customizable RGB LED Matrix Corner Mount

This is a rough prototype for the first of many (OK a few) minimalist RGB LED panel mounts. It is untested, but I'm running through customizer to test.

What it does:

These parts are designed to hold a diffuser matrix and a difuser layer (frosted poly, wax paper+glass, etc.) The customizer lets you pick the total height of the frame with these pieces in place so you can have a nice, snug fit. You can also select the depth of the base, width of the walls and diameter of the through hole in case you need a particular screw type (M2, M2.5, M3, M4, etc.)

Assumptions:

- Basic panel is 14mm in depth, using am M3 mounting screw offset 7.5mm from each outer edge. (Seems standard based on my panels)

Future Plans:

- Create additional mounts for:
- Edge panel mount (1 screw (mid panel) and 2 screws (joining panels)
- Mutli-panel mounts (2-way and 4-way)
- Some form of front-mount
- Maybe some form of decorative framing to encase the glass/plexy in front
- Ad