Cute Melted Candle Holder - SEREV3d

By now we have a collection of amazing and cute candle holders! Let us present the latest one: ⭐ Cute Melted Candle Holder You can use this design and all the other FREE SEREV3d Collection to participate in the SEREV3d Halloween 3d print Contest to win awesome prizes: https://www.patreon.com/posts/114323284 Recommended filaments: ►Bambu PLA Matte White Or ►Bambu Dual Silk Filaments   Recommended led tealight: ▶D37.2x36.6mm LED Flame Tea Light Candle Set ------------------------------------ Print difficulty level: Beginner Print settings: (If you use Bambu or Orca slicer, all the print settings are automatically loaded in the 3mf file) -Layer height: 0.16-0.2mm (within this range it works well, the lower the layer height, the less you can see the layer lines) -Wall loops: 2 -Infill: 10%, Gyroid -Support: a minimal amount of support is needed under the two arms, you can activate Auto Tree(Organic) supports with a 30 degree threshold angle, TopZ distance 0.24, BottomZ distance 0.2 Estimated print time: 1.5h-2h ----------------------------------- Painting and & post process instructions: 1. Prep: Use white filament and sand the model lightly to smooth any layer lines (recommended to use wood filler/or plastic putty, and primer spray with a little bit of sanding to minimize layer lines visibility) 2. Base Coat: Spray the entire model with a light ivory or cream primer as a base coat. This gives the model an even starting color and helps subsequent paint layers adhere better. 3. Shading and Depth: Use a wash technique with diluted brown, reddish, or orange acrylic paint. Apply the wash into all the crevices (like between the wax drips) to create shadows. Wipe off any excess from raised areas with a paper towel or cloth. Airbrush or hand-paint gentle red and orange tones around the lower portions of the model to create the melted wax effect, blending from dark at the bottom to lighter at the top. 4. Highlighting Details: Lightly dry-brush off-white or very light beige pain