Cybee truck

Layer Height: Increase the layer height slightly to 0.3mm. This will reduce the number of layers required to complete the print, speeding up the printing process while still retaining reasonable surface quality.
Print Speed: Raise the print speed to around 60-80mm/s for faster printing. This increased speed will accelerate the movement of the printer's nozzle, reducing the time taken to deposit each layer.
Infill Density: Lower the infill density to 10-15%. A lower infill density reduces the amount of material used to fill the interior of the print, decreasing printing time without significantly compromising structural integrity.
Print Temperature: Set the nozzle temperature to the lower end of the recommended range for your PLA filament (around 200-210°C). This lower temperature helps speed up the extrusion process while still ensuring proper filament flow and adhesion.
Build Plate Temperature: Maintain a build plate temperature of around 50°C for PLA filament. This moderate tempe