Cyberalienfemalekeyring1

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmThe Model is 50x50mm in sizeYou may print at higher layer heights below the Min Depth of 1.4mmThe Max Depth is 2.4mm and the Actual Depth is 2.4mmFilaments Used: PLA PolyLite Natural Transmission Distance: 21 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Sunny Orange Transmission Distance: 8 PLA+ Esun Space Blue Transmission Distance: 3.5 PLA+ eSUN PERPUL Transmission Distance: 5 PLA+ Esun Pink Transmission Distance: 5 PLA Hatchbox White Transmission Distance: 10 PLA+ Sunlu Yellow Transmission Distance: 10This print uses 11 unique filamentsSwap Instructions: Start with Natural At layer #21 (1.04mm) swap to Jade White At layer #37 (1.68mm) swap to Grey At layer #41 (1.84mm) swap to Red At layer #44 (1.96mm) swap to Black At layer #46 (2.04mm) swap to Sunny Orange At l