CyberBrick Turntable

CyberBrick TurntableThe Cyberbrick turntable is easy to build and control, requiring no additional hardware beyond the Cyberbrick set.The turntable can be controlled with the remote control, rotating continuously to the left or right, or stopping it. A speed control feature will be added in future updates. To slow the turntable down, a different Bambulab gear reduction can be installed. Assembly instructions:Turntable:Insert the two metal rods into the designated holes and place the first two gears. Now place the small gear onto the motor and insert it into its designated slot. Connect the motor to the receiver and secure it with two screws. Connect the battery and receiver to the switch and screw it in place from the side. Move the switch to the lower position to insert it. Finally, screw the battery to the base using the printed holder.Place the next two gears and the clutch onto the two metal rods.Screw the gear ratio in place with the printed cover and place the printed gear onto t