Cycliq Fly12 Camera Handlebar Mount

This is my handlebar mount that I designed for use with my Cycliq Fly12 camera. I've printed several of these to go on my other bikes, to supplement the genuine Cycliq Fly12 handlebar mount that I got with the camera. Additional mounts are quite pricey (see link below), which is why I designed this alternative.https://cycliq.com/product/fly12-handlebar-mount/ Note: The mount is suitable for 31.8 mm diameter handlebars, which is the most common handlebar size. The mount requires a pair of M3 machine bolts with M3 nuts to connect the upper and lower parts: - M3 bolts all have an outer diameter of 3 mm for the threaded part. The threaded part needs to be at least 11 mm long. - The mount is designed with a 6 mm diameter recessed hole in the upper half for the bolt head. The bolt head must therefore be 6 mm or smaller in diameter. - M3 hex nuts measure 5.5 mm between the parallel sides, or 6 mm between opposite edges (see final photo). The upper part needs to be printed with supports. I