Cyclone Separator Caster Wheel/Foot

I made a flange mount for a dust cyclone so the cyclone is securely mounted to the lid. The feet consist of a caster wheel or a foot that you can screw in with an M10 bolt. A fixed foot is also included. The bottom flange is also available with or without an extension.I have a 60 liter metal barrel and a 30 liter metal barrel with a removable lid by means of a clamp. The caster base is mounted by means of a mounting piece inside the barrel, the bolt holes of which are drilled through the bottom. Castor foot and fixed foot are added with and without groove for barrel edge Filament I used Bambu PETG-CF.Dried with a filament dryer before printing and dried during printing using the filament dryer.For the caps I used 2 wall, 100% infill and filling linear. Remark:A bit of a skewer appears around the hexagonal hole of the caster wheel foot when printing, but this isn't a problem. You can scrape it off and insert the nut. I didn't use support for it. The arrow on the inside mounting