D-100 Dice Set Rounded

An improved version of my basic set, these dice are perfect for beginners to experienced players alike!This set includes a unique 100-sided dice called a D-100 which can be used for special functions in numerousgames from roleplaying to strategy.A unique clip-together design gives the D-100 an excellent finish without the need for glue or supports!Although it is practically impossible to create a truly fair D100, these dice have been carefully designed to be as fair as possible. Each of the faces is perfectly flat and numbered using a custom inverted alternating distribution that ensures an average roll of 50.5 ±2.6 (This may vary due to differences in print quality.)The dice can also be used traditionally, or as a D20 by dividing the roll by 5.Assembling the D100: Slot the two clips together in a cross shape and fit them into one of the halves. Align the small holes on the bottom of each half and clip together. It's as simple as that!Included:1x D42x D61x D81x D101xD121x D201x D100✅ No supports✅ No glue✅ Scalable🟩 Brim recommendedEasy print settings:-Print time:*Single colour ~2h 20 minMulticolour ~5h+-Wall loops 2-Infill 15%/100% (for D100/Dice set)-Support N/A-Brim Recommended*Times estimated for high speed printers such as: K1, K1max, X1C, p1s etc.For additional settings see below:Dimensions:15-22mmAdditional settings:-Filament usage 75g (for all dice, multicolour version may differ)-Layer height 0.2mm/variable 0.08-0.2mm-Bottom shell layers 5-Detect thin wall No-Filament(s) used in demo esun pla+ CC3D silk plaMaker's comments:The dice have been designed to print using FDM however, if you have the option, resin printing may give much cleaner results. However, the clipping mechanism may not function correctly in resin so I have included the full D-100 in case it is needed.Quality seems good with only minor print defects. These dice roll excellently, especially the D-100 which can be difficult to stop. I advise using a very flat surface or some kind of barrier.Ple