D20 Dice Numerically Balanced Easy Color

I designed a numerical balanced D20 die that uses numbers as objects for multi-material coloring rather than paint by number like other dice. All numbers are skewed to be aligned flat with the bed for best print orientation when printing in multi-materials. The dice body is name D20 and the numbers are named correctly or use a "_" to denote which part of the number it is. One click painting, just select object D20 to change the body color. Slot 1 for numbers and Slot 2 for body. All test prints were done on a Bambulab A1 mini in PLA and PETG and the max angle is 48 degrees. Tested at 0.12 and 0.16 layer height, 2 walls, 100% infill, and 8mm brim. If you have great bed adhesion this dice can be printed in PETG/PLA mix. Brim will want to be letter color instead of body color though, if you can trick the slicer please upload a new profile. Numerically balance D20 die is based on a paper by Bosch, Fathauer, and Segerman. The point of ordering the dice in this manner is to keep the