Da Da Dan Okarun HueForge

DESCRIPTION Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 140x140mm in size  You may print at higher layer heights below the Min Depth of 0.48mm  The Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Fuschia Transmission Distance: 5 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 5 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Fuschia At layer #12 (1.04mm) swap to Sky Blue At layer #24 (2mm) swap to White for the rest.