Dactyl 36-key ("minidox")

This is a 36-key version of the Dactyl Manuform (though the thumb cluster is different so it's not really a "manuform" - more like a "minidox").

Derived from: https://github.com/ibnuda/dactyl-keyboard/tree/coffin

Only parts for the right hand side are included, use the mirror function in your slicer to get the left hand side parts.

I recommend using Cura with tree supports - the supports from PrusaSlicer are practically impossible to remove.

I used 3x10mm wood screws to attach the bottom plate.

Build log for a larger version of the keyboard: https://blog.jfedor.org/2020/11/dactyl-manuform-build-log.html

QMK fork with configuration and layout for this keyboard: https://github.com/jfedor2/qmk_firmware